The Synergy Envirotab 4g Starter Kit Comes with...
- (1) Foaming Pump Sprayer
- (2) Pouches (containing 28 tablets each) of Envirotab 4g ACD (Aqueous Chlorine Dioxide) Tablets
- (1) 2 Liter (67.3 oz) Bottle of Synergy Soil Break
Applications for Use:
- Outside the Home -
- Removing mold and mildew stains and odors from patio furniture, awnings, clapboards, lawn furniture, children's toys, pool liners, and more.
- Inside the Home -
- Refrigerator and freezer door seals, tub and shower walls, tile and grout, basement walls, sheetrock and other painted surfaces, and more.
Mixing Instructions:
- Remove contents from the new pump foaming sprayer canister and fill with 1 liter (just over 1 quart) of warm water.
- Add (1) 4g Envirotab Tablet from the foil pouch - DO NOT TOUCH the tablet.
- Apply the lid and allow the tablet 60 seconds to dissolve.
- Remove the lid and add 1oz of Synergy Soil Break. Add lid tightly and swirl or gently shake to mix.
Use Instructions:
- For best results from the solution, do not use it in direct sunlight.
- Pump up the sprayer 30 times to pressurize and adjust the sprayer nozzle to the desired pattern.
- Spray foam on stained or odorous surfaces. Let set for 1-3 minutes.
- If the surface is porous or badly stained, agitate with a scrub pad or brush.
- Wipe or rinse the surface free of cleaning residue.
Notes on Personal Protective Equipment:
Wear gloves and goggles AT ALL TIMES during mixing and use. A full face shield is recommended.
Ensure good airflow when using out-of-doors.
Wear a respirator if used inside the home.
